This is the method on how to build a water splashing diorama...
STEP1. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume HARDNER. Mix during 1 Minute. and Coat Mixed Water Effect at The edge of Picture Frame. Dry it during 1 Hour or 2 Hours.
STEP2. Attach Model Figure on the Basement with Instant Glue.
STEP3. Make Large Scale Splashing Wave Frame. Use Clear PET bottle.
STEP4. Cut and Make a Frame shape with Scissors.
STEP5. Attach Frame with Instant Glue on your Basement.
STEP6. Watch Frame Shape.
STEP7. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume
HARDNER and Insert Blue & Black Color Enamel Paint. and Pour Them.Dry it during 1 Hour or 2 Hours.
STEP8. Mix Splashing Water Effect 200% Volume RESIN with 100% Volume HARDNER and Insert Blue and Black Color Enamel Paint. and Drop 2~3 Points Effector. (Effector is Brown Glass Bottle) Mix During 3 Minutes and Coat them with Paint Brush. (Clean Your Paint Brush with Lacquer Thinner after process)
STEP5. Use Sharp and Small Paint Brush to express Detail Splashing Waves.
Cool tutorial, you made it? Good! :)
ReplyDeletei'm not the person who made this...it is from the net...but i've tried this...so far it looks ok...but the resin and hardner really expensive...hope this tutorial helps bro..
ReplyDelete