Water Splashing Diorama

This is the method on how to build a water splashing diorama...

STEP1. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume HARDNER. Mix during 1 Minute. and Coat Mixed Water Effect at The edge of Picture Frame. Dry it during 1 Hour or 2 Hours.

STEP2. Attach Model Figure on the Basement with Instant Glue.

STEP3. Make Large Scale Splashing Wave Frame. Use Clear PET bottle.

STEP4. Cut and Make a Frame shape with Scissors.

STEP5. Attach Frame with Instant Glue on your Basement.

STEP6. Watch Frame Shape.

STEP7. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume

HARDNER and Insert Blue & Black Color Enamel Paint. and Pour Them.
Dry it during 1 Hour or 2 Hours.

STEP8. Mix Splashing Water Effect 200% Volume RESIN with 100% Volume HARDNER and Insert Blue and Black Color Enamel Paint.  and Drop 2~3 Points Effector. (Effector is Brown Glass Bottle) Mix During 3 Minutes and Coat them with Paint Brush. (Clean Your Paint Brush with Lacquer Thinner after process)

STEP5. Use Sharp and Small Paint Brush to express Detail Splashing Waves.

WIP: HG 1/144 GN007 Gundam Arios

Here is my latest build. this is the HG 1/144 GN007 Gundam Arios from the Gundam 00 series. This kit will be a practice on detailling and moding. First i reshaped the front of the torso.

next after some sanding, i added a piramid block and some small detailling with plaplate.

more minor detailling done...add plaplate detail on the torso. For the head, i've sharpen the V fin and added another V fin on the head. here is the over all design...

UPDATE 26/dec/2009: i a small block is SBed from the original design and add an add on parts(vent) from G-temple.

here how it is looks like...and also add some detail on the front skirts(not final...maybe will add more details)

overall........

thats all for this update stay tune for more...